W25P20VSNIG T&R

W25P10, W25P20 AND W25P40 1M-BIT, 2M-BIT AND 4M-BIT SERIAL FLASH MEMORY WITH 40MHZ SPI Formally NexFlash NX25P10, NX25P20 and NX25P40 The Winbond W25P10/20/40 are fully compatible with the previous NexFlash NX25P10/20/40 Serial Flash memories. -1- Publication Release Date: November 28, 2005 Revision M W25P10, W25P20 AND W25P40 Table of Contents1. GENERAL DESCRIPTION ......................................................................................................... 4 2. FEATURES ................................................................................................................................. 4 3. PIN CONFIGURATION ............................................................................................................... 5 4. PIN DESCRIPTION..................................................................................................................... 5 4.1 Package Types ............................................................................................................... 5 4.2 Chip Select (/CS) ............................................................................................................ 5 4.3 Serial Data Output (DO) ................................................................................................. 6 4.4 Write Protect (/WP)......................................................................................................... 6 4.5 HOLD (/HOLD) ............................................................................................................... 6 4.6 Serial Clock (CLK) .......................................................................................................... 6 4.7 Serial Data Input (DI) ...................................................................................................... 6 5. BLOCK DIAGRAM ...................................................................................................................... 7 6. FUNCTIONAL DESCRIPTION ................................................................................................... 8 6.1 6.2 SPI OPERATIONS ......................................................................................................... 8 6.1.1 SPI Modes ........................................................................................................................8 6.1.2 Hold Function ...................................................................................................................8 WRITE PROTECTION.................................................................................................... 8 6.2.1 7. Write Protect Features......................................................................................................8 CONTROL AND STATUS REGISTERS..................................................................................... 9 7.1 7.2 STATUS REGISTER ...................................................................................................... 9 7.1.1 BUSY................................................................................................................................9 7.1.2 Write Enable Latch (WEL) ................................................................................................9 7.1.3 Block Protect Bits (BP2, BP1, BP0)................................................................................10 7.1.4 Reserved Bits .................................................................................................................10 7.1.5 Status Register Protect (SRP) ........................................................................................10 7.1.6 Status Register Memory Protection ................................................................................11 INSTRUCTIONS........................................................................................................... 11 7.2.1 Manufacturer and Device Identification...........................................................................12 7.2.2 Instruction Set (1).............................................................................................................12 7.2.3 Write Disable (04h).........................................................................................................13 7.2.4 Write Enable (06h)..........................................................................................................13 7.2.5 Read Status Register (05h) ............................................................................................14 7.2.6 Write Status Register (01h) ............................................................................................15 7.2.7 Read Data (03h) .............................................................................................................16 7.2.8 Fast Read (0Bh) .............................................................................................................17 7.2.9 Page Program (02h) .......................................................................................................18 7.2.10 Sector Erase (D8h).......................................................................................................19 -2- W25P10, W25P20 AND W25P40 8. 9. 7.2.11 Chip Erase (C7h)..........................................................................................................20 7.2.12 Power-down (B9h) ........................................................................................................21 7.2.13 Release Power-down / Device ID (ABh) .......................................................................22 7.2.14 Read Manufacturer / Device ID (90h) ...........................................................................24 ELECTRICAL CHARACTERISTICS......................................................................................... 25 8.1 Absolute Maximum Ratings (1) .................................................................................... 25 8.2 Operating Ranges......................................................................................................... 25 8.3 8.4 Power-up Timing and Write Inhibit Threshold .............................................................. 26 DC Electrical Characteristics (Preliminary)(1) .............................................................. 27 8.5 AC Measurement Conditions........................................................................................ 28 8.6 AC Electrical Characteristics ........................................................................................ 29 8.7 AC Electrical Characteristics (cont’d) ........................................................................... 30 8.8 Serial Output Timing ..................................................................................................... 31 8.9 Input Timing .................................................................................................................. 31 8.10 Hold Timing................................................................................................................... 31 PACKAGE SPECIFICATION .................................................................................................... 32 9.1 8-Pin SOIC 150-mil (Winbond Package Code SN) (NexFlash Package Code N) ....... 32 10. ORDERING INFORMATION .................................................................................................... 33 11. REVISION HISTORY ................................................................................................................ 34 -3- Publication Release Date: November 28, 2005 Revision M W25P10, W25P20 AND W25P40 1. GENERAL DESCRIPTION The W25P10 (1M-bit), W25P20 (2M-bit) and W25P40 (4M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. They are ideal for code download applications as well as storing voice, text and data. The devices operate on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving 8-pin SOIC type packages as shown below. Contact Winbond for availability of alternate packages. As part of a family of Serial Flash products, Winbond also provides a compatible migration path to 8M/16M/32M-bit densities. The W25P10/20/40 array is organized into 512/1024/2048 programmable pages of 256-bytes each. A single byte or, up to 256 bytes, can be programmed at a time using the Page Program instruction. Pages are grouped into 2/4/8 erasable sectors of 256 pages (64K-byte) each as shown in figure 2. Both Sector Erase and Chip (full chip) Erase instructions are supported. The Serial Peripheral Interface (SPI) consists of four pins (Serial Clock, Chip Select, Serial Data In and Serial Data Out) that support high speed serial data transfers up to 40MHz. A Hold pin, Write Protect pin and programmable write protect features provide further control flexibility. Additionally, the device can be queried for manufacturer and device ID. Special customer ID (for copy authentication) and factory programming is available, contact Winbond for more information. The Winbond W25P10/20/40 are fully compatible with the previous NexFlash NX25P10/20/40 Serial Flash memories. 2. FEATURES • 1M / 2M / 4M-bit Serial Flash Memories • Programming Features – Page program up to 256 bytes